The Sparrow Family
Carlson Sparrow II
The two-seat, side-by-side Sparrow with dual controls, developed from the original design.
Sparrow II
Carlson archive photograph to be added
- Seats
- 2 (side-by-side)
- Category
- Experimental amateur-built
- Landing gear
- Tricycle
- Historical engine
- Rotax 582
- Construction
- 4130 steel-tube fuselage, aluminum wing, fabric covered
Legacy fleet supported. Contact Carlson Aircraft regarding current kit, component, plan, and support availability.
Overview
The Sparrow with room for two
The Sparrow II widened the original design to seat two people side by side, with dual controls so either seat can fly the airplane. It kept the Sparrow’s basic formula — welded steel-tube fuselage, strut-braced high wing, enclosed cabin — and scaled it for a second occupant.
Side-by-side seating makes the Sparrow II a natural airplane for flying with a friend or family member. The Rotax 582 liquid-cooled two-stroke is the engine historically associated with the model.
An optional folding wing allowed the airplane to be stored in a smaller space or moved on a trailer, a practical feature for owners without a dedicated hangar.
Specifications
Sparrow II Specifications
Reference figures from historical Carlson and aviation publications. Figures vary with engine, configuration, and the individual aircraft.
Specifications being verified
Carlson Aircraft is reviewing original factory documentation for the Sparrow II. Verified specifications will be published here once that review is complete. For questions about a specific aircraft, contact us.
Published specifications are historical reference figures and may vary by aircraft, engine, configuration, builder, and year. Builders and operators should refer to the applicable Carlson Aircraft documentation for their individual aircraft.
Design & Construction
How the Sparrow II is built
Fuselage and cabin
A widened welded 4130 steel-tube fuselage carries two seats side by side in an enclosed cabin, with dual controls.
Wing and covering
Strut-braced high wing with aluminum spar structure and fabric covering. A folding wing was available to make storage and trailering easier.
Landing gear
Tricycle landing gear.
Known engine installations
Engines historically associated with the Sparrow II. This is a historical record, not a list of currently approved or supported installations.
-
Rotax 582
Liquid-cooled twin-cylinder two-stroke, approximately 64–65 hp.
More of the Sparrow family
Interested in This Aircraft?
Carlson Aircraft is working to preserve these designs and support the people who continue to build, fly, restore, and maintain them. Contact us and tell us which aircraft you are interested in.